1000328682 Ejector Set, ball joint1 Push and pull sleeve set, 36 pcs.
Brief Information:
Press and pull sleeve kit, 36 pcs
General Information:
•for the assembly and disassembly of bearings
•ideally for silent bearings, hydro bearings, bushings, ball
bearings, simmer rings etc.
•universal use for passenger cars, trucks, communal,
agricultural and forest vehicles
•outstanding to use also in connection with workshop press
or hollow piston cylinder
•according to use application the sheaths individually can
be reworked
•pressure bearing protects against increased friction during
the process
•in durable plastic storage case
Attention: the spindles need to be greased with a good
lubricant for each application! Do not overload spindles,
otherwise the thread lengthens and the pitch of the nut and
spindle no longer match. The result: the nuts will seize up.
Always check the applied force at the drive with a torque
wrench!
Maximum permitted torque: Spindle M10x1,5 60 Nm Spindle
M12x1,5 100 Nm Spindle M14x1,5 180 Nm Spindle M16x1,5 250 Nm
Viewed
1) Installation instructions are not included in all instances. If you or your customers require installation instructions, please ask before ordering. All products should be installed only according to the intended purpose and only by specialist trained personnel. 2) The parts offered are reproductions. The specified original replacement parts numbers are for the purpose of comparison. This information has been complied to the best of our abilities, but errors cannot be excluded. We are unable to accept liability for the accuracy of the specifications. The capability for use must be checked before each installation.